PVC Roofing in Manitowoc, WI
Grease and animal fats soften and swell rubber and asphalt roofs, and some process exhaust attacks TPO over time. PVC resists them. That makes it the standard choice where kitchen hoods, fryers, cheese and food processing, or industrial exhaust land on the roof. Manitowoc County and its neighbors have plenty of all three. Like TPO, PVC has hot-air welded seams, so the roof becomes one sheet. We install new PVC roofs, add grease containment at exhaust fans, and repair existing PVC with matching welded patches. When a different membrane has already been damaged by grease, we cut out the softened area and replace it, then contain the source so it doesn't happen again.
What's included
- New PVC roofs, mechanically attached or adhered
- Hot-air welded seams, probed
- Grease containment and sacrificial pads at exhaust fans
- Grease-damaged EPDM, TPO or modified bitumen cut out and replaced
- Welded PVC patches and flashings
- Flashings at hoods, vents and process curbs
- Walkway protection along service paths
- Warranty options explained in writing
Sound like your roof?
- Soft, swollen or bubbled membrane near a kitchen exhaust fan
- Dark staining spreading from hoods or vents
- Repeat leaks around exhaust curbs
- Rooftop process equipment discharging onto the roof
- Odor complaints and sticky residue on the roof
Related services
PVC Roofing — FAQs
The membrane costs more and the formulation resists grease and chemicals better. On a roof that sees those, it is cheaper over the roof’s life than replacing grease-damaged membrane every few years.
It depends on how far the exhaust spreads. Sometimes containment plus PVC around the fans is enough; on a food plant with exhaust across the roof, a full PVC roof is the better choice.
Not directly in most cases; they are different polymers. The transition needs a proper detail between the two systems.