If your flat roof only leaks when the snow starts to melt, the problem is almost always drainage, not the field of the roof. Water can't get off the roof because a drain, scupper or edge is frozen, so it ponds and backs up under seams and flashings that never hold standing water in summer.
How it happens
Snow on the roof melts from the sun or from building heat. The meltwater runs underneath the snow toward the drains. If the drain or scupper is frozen, or the gutter at the edge is packed with ice, the water stops and pools. As it rises, it reaches laps, flashings and penetrations, and it gets in.
Why the lakeshore sees so much of it
Lake Michigan holds heat into early winter and stays cold into spring, so shoreline temperatures tend to swing around freezing more often than inland. Every swing is a melt by day and a refreeze at night. Lake-effect snow and wind-packed drifts add more snow in the wrong places, often right against parapets and walls where drains sit.
Roof leaking right now?
Manitowoc Superior Flat Roofing repairs, coats and replaces commercial and flat roofs across Manitowoc County and the lakeshore, with a written price before any work starts. Request a quote online and we’ll call you back.
Where ice builds
- Drains near exterior walls or over unheated spaces.
- Scuppers through parapets, where cold wind hits both sides.
- Gutters and edges on low-slope roofs.
- Low spots where water collects before reaching the drain.
- Where a flat roof meets a sloped roof or wall on homes.
What to do right now
Protect the interior, then get the drains open. Steam opens frozen drains and cuts channels through ice without damaging the membrane. Snow is cleared from around drains and the leak area so water can move. Don't use picks, axes or salt on the roof.
The lasting fix
- Drain changes: moving a drain, adding one, or enlarging a scupper.
- Heat tape: on drains and scuppers that freeze every year, installed correctly.
- Re-sloping: crickets or tapered insulation so water reaches the drain. See ponding water on a flat roof.
- Insulation and air sealing: less heat loss means less snow melting in the wrong places.
- Flashing height: raising flashings where water backs up.